You are here: Home » Solution » Kraft Paper Making Line » Paper Industry Approach System

Paper Industry Approach System

paper-industry-approach-system

In paper making process, approach system is the basic system, so there are some paper industry approach system tips need to pay attention.

Approach System Tips In Paper Making Process

1. It is advisable to route the overflow pipe from the high tank to the pulp pool preferably below the level of the slurry level, the overflow level controller fills the overflow pipe with slurry so that air can not enter the slurry.

2. The pipe from the high box down into the machine external thick white water tank to the entrance of the fan pump should be slightly upward tilt, where the quantitative valve should as close to the bottom, the scene conditions permitting, and even installed in the bottom of the horizontal tube.

3. The pipe from the high box down into the machine external thick white water tank to the entrance of the fan pump should leave a certain distance with fan pump inlet pipe recommendations.

4. The pressure of cleaning equipment diluting white water is required stability.

Email: paperproductmachine@gmail.com